-create new folder or ctrl+shift+N
-highlight the name....and press ctrl+0160
-and press enter.
-highlight the name....and press ctrl+0160
-and press enter.
Saturday, September 27, 2014
FIX deadboot / no recovery / no fastboot / formatted while in QPST mode
(REPOST ) I’m not the owner of this tutorials,
REQUIREMENTS -
1. Dead-boot flare but still gets detected in device manager (unknown device or in COM PORTS).
2. USB cable
3. JB / ICS drivers
4. Laptop / PC runnning Windows. I’ve tested this using Windows XP SP3 and Windows 7 32bit SP1.
5. Qualcomm Product Support Tools. Ive tested this using version 2.7 build 399
6. Jelly Bean BP Firmware
7. Jelly Bean img dump
8. Common sense Download links -
QPST 2.7 build 399 – Download
JB drivers – Download
ICS drivers – Download
Jelly Bean BP Firmware – Download (you can also use the one posted in the group) Jelly Bean IMG dump – you can use the one posted in the group (boot.img, recovery.img, system.img, userdata.img, cache.img)
Steps How to Fix –
3 things to do -
a. Install QPST
b. Install drivers
c. Run QPST and reprogram EMMC
Install QPST
1. Extract QPST-2.7.399.rar. Run SETUP.EXE
2. Run SETUP.EXE, press INSTALL when it prmpt to insall additional Visual C++ runtime libraries. Follow the defaults, press NEXT until it is finished with the install.
Install drivers
1. Connect deadboot flare to PC / Laptop.
2. Go to device manager, expand PORTS (COM & LPT). Check if there is an item called Qualcomm HSUSB QDLOADER 9008. If the item is there, you are done with driver install. If it does not exist, proceed to step3.
3. If there is no item under PORTS (COM & LPT), check device manager under OTHER DEVICES > Unknown Device
4. Double click UNKNOWN DEVICE > UPDATE DRIVER > BROWSE MY COMPUTER > browse to the folder where you saved extracted the ICS / JB drivers. It will install the driver, if it prompts for unsigned drivers, press INSTALL ANYWAY.
5. It should now be listed under COM PORTS > Qualcomm HSUSB QDLOADER 9008.
Run QPST and reprogram EMMC (this is where the magic begins)
If you are on Windows 7, make sure you run it under compatibility XP Sp3 and RUN AS ADMINISTRATOR
1. Run EMMC SOFTWARE DOWNLOAD.
2. Press BROWSE, it will detect your phone. Look for the PHONE TAB that says DOWNLOAD. Press OK.
3. Put check mark on PROGRAM BOOTLOADERS, PROGRAM MMC DEVICE, TRUSTED.
4. Under FLASH PROGRAMMER FILENAME, enter MPRG8X25.hex
5. Under BOOT IMAGE, enter 8X25_msimage.mbn
6. Press LOAD XML DEF > navigate to your extracted JB firmware > select rawprogram0 > press OPEN.
7. Press LOAD PATCH DEF > navigate to your extracted JB firmware > select patch0 > press OPEN
8. PRESS DOWNLOAD
9. An warning message may appear, TIME OUT WAITING etc etc or COOKIE NOT RECEIVED. If the error is TIME OUT WAITING, press OK and then press SWITCH DEVICE TO DLOAD. Check the flare, it will show RESET FOR ENTRY QPST.
10. Exit EMMC SOFTWARE DOWNLOAD. Proceed to flash Jelly Bean BP Firmware and then flash Jelly Bean img dump.
11. IF ERROR IS COOKIE NOT RECEIVED, sorry it is still bricked. This will also fix CWM formatted boot partitions. No need for the ENTRY QPST FIX I posted months ago.
REQUIREMENTS -
1. Dead-boot flare but still gets detected in device manager (unknown device or in COM PORTS).
2. USB cable
3. JB / ICS drivers
4. Laptop / PC runnning Windows. I’ve tested this using Windows XP SP3 and Windows 7 32bit SP1.
5. Qualcomm Product Support Tools. Ive tested this using version 2.7 build 399
6. Jelly Bean BP Firmware
7. Jelly Bean img dump
8. Common sense Download links -
QPST 2.7 build 399 – Download
JB drivers – Download
ICS drivers – Download
Jelly Bean BP Firmware – Download (you can also use the one posted in the group) Jelly Bean IMG dump – you can use the one posted in the group (boot.img, recovery.img, system.img, userdata.img, cache.img)
Steps How to Fix –
3 things to do -
a. Install QPST
b. Install drivers
c. Run QPST and reprogram EMMC
Install QPST
1. Extract QPST-2.7.399.rar. Run SETUP.EXE
2. Run SETUP.EXE, press INSTALL when it prmpt to insall additional Visual C++ runtime libraries. Follow the defaults, press NEXT until it is finished with the install.
Install drivers
1. Connect deadboot flare to PC / Laptop.
2. Go to device manager, expand PORTS (COM & LPT). Check if there is an item called Qualcomm HSUSB QDLOADER 9008. If the item is there, you are done with driver install. If it does not exist, proceed to step3.
3. If there is no item under PORTS (COM & LPT), check device manager under OTHER DEVICES > Unknown Device
4. Double click UNKNOWN DEVICE > UPDATE DRIVER > BROWSE MY COMPUTER > browse to the folder where you saved extracted the ICS / JB drivers. It will install the driver, if it prompts for unsigned drivers, press INSTALL ANYWAY.
5. It should now be listed under COM PORTS > Qualcomm HSUSB QDLOADER 9008.
Run QPST and reprogram EMMC (this is where the magic begins)
If you are on Windows 7, make sure you run it under compatibility XP Sp3 and RUN AS ADMINISTRATOR
1. Run EMMC SOFTWARE DOWNLOAD.
2. Press BROWSE, it will detect your phone. Look for the PHONE TAB that says DOWNLOAD. Press OK.
3. Put check mark on PROGRAM BOOTLOADERS, PROGRAM MMC DEVICE, TRUSTED.
4. Under FLASH PROGRAMMER FILENAME, enter MPRG8X25.hex
5. Under BOOT IMAGE, enter 8X25_msimage.mbn
6. Press LOAD XML DEF > navigate to your extracted JB firmware > select rawprogram0 > press OPEN.
7. Press LOAD PATCH DEF > navigate to your extracted JB firmware > select patch0 > press OPEN
8. PRESS DOWNLOAD
9. An warning message may appear, TIME OUT WAITING etc etc or COOKIE NOT RECEIVED. If the error is TIME OUT WAITING, press OK and then press SWITCH DEVICE TO DLOAD. Check the flare, it will show RESET FOR ENTRY QPST.
10. Exit EMMC SOFTWARE DOWNLOAD. Proceed to flash Jelly Bean BP Firmware and then flash Jelly Bean img dump.
11. IF ERROR IS COOKIE NOT RECEIVED, sorry it is still bricked. This will also fix CWM formatted boot partitions. No need for the ENTRY QPST FIX I posted months ago.
Subscribe to:
Posts (Atom)